机房管理对策探微

本文介绍了几种最常见的机房管理手段并结合Windows2003 server平台上利用ISA Server2004提出了一套比较行之有效的网络管理方法.     

基于建构主义理论的虚拟学习社区平台的搭建

虚拟学习社区是以建构主义理论为基础,多种网络信息技术相结合的在线教学环境。本文分析了虚拟学习社区建构主义理论,研究其体系结构,并对虚拟学习社区平台的开发进行阐述。     

一种基于知网语义相似度计算的应用研究

随着常见问题集(FAQ)的积累,问句数量日益增大,逐页浏览的知识获取方式很难满足用户的实际需求,也浪费用户大量的精力和时间,而基于FAQ的自动问答系统是解决该问题的一种有效途径。本文设计了QuickFaq自动问答系统框架,采用基于知网的语义相似度计算模块,找出相似问句并返回答案。实验表明,该方法提高了问答系统的召回率和不匹配率。     

三维地形显示中数据缓存与调度算法研究

存储调度是大规模地形可视化算法的重要组成部分,但近年来对其研究较少。本文重点讨论了可视化实现中比较常用的调度算法:系统调用和操作系统页面置换算法,对其进行了详细的分析,指出两种方法相同的本质:都是依据程序执行的过程中对内存的局部访问特点设计的。可视化过程对内存的需求不同于程序执行的局部性,地形浏览有其特殊性。根据地形浏览的特点,本文提出了一种专门用于地形浏览的预取和替换相结合的存储策略。并用两个评价准则验证了方法的有效性。     

下一代网络的服务质量及策略研究

针对NGN的网络体系结构和业务特点,在深入分析下一代网络QoS技术的基础上,阐述了VOIP网络中QoS的主要模型和关键技术,并以模拟实验为依据比较了各种QoS的控制策略,从系统的角度出发,对下一代网络的QoS保障机制进行了讨论。     

用于胎儿心电信号测量的嵌入式数据处理系统研究

简要介绍了测量胎儿心电信号的意义和方法,提出了一种综合单片机和数字信号处理器(DSP)的数据处理系统的设计方案。文章从软硬件两部分详细介绍了设计方案。结果显示,本嵌入式心电信号处理系统能够对胎儿心电信号进行实时高精度处理和监控,而且具备便携特点,有很高应用价值。     

数字电视CAS中DES加密模块的FPGA实现

一种基于 FPGA 的数据加密标准算法的实现。就资源优先和性能优先分别使用循环法和流水线法对 DES 加密算法进行了设计,并对其进行了比较。通过采用子密钥简单产生和 ROM 优化 S盒的方法,对流水线法进行改进,达到了资源占用率低、加密速度快的效果。     

Direct microscale imprinting of Al at room temperature with Si inserts

For direct imprinting of metals, hard materials such as diamond and SiC have been used to construct mold inserts in preference to Si, despite the ease in fabricating Si-based micro-/nano- scale structures. In this communication, we demonstrate that micron scale Al structures can be replicated with good fidelity at room temperature by compression molding with Si inserts without incurring insert damage. We further report on results of a finite element analysis of the mechanics of the molding process. The finite element results provide some understanding of the observed lack of damage to the Si inserts.     

An on-chip micro-friction tester for tribology research of silicon based MEMS devices

An on-chip micro-tribotester has been developed to investigate the friction and wear properties on side contacting surfaces of single crystal silicon that is most widely used in usual microelectromechanical systems actuators. The device is fabricated with standard bulk silicon process and bonding technology based on parameters that have been theoretically calculated to get the stiffness and friction forces. In this device, two comb shuttles are used. One comb shuttle is used to contact the friction surfaces under a certain normal load. The other comb shuttle moves back and forth to provide relative motion between the two friction surfaces. The tested two surfaces are the top surface of an anchor with rounded end and the lateral surface of a beam that has been connected to the two comb shuttles. Tribology experiments on the etched silicon surfaces that are side contacted have been carried out. Friction coefficients testing results suggest that dynamic friction coefficient is about 0.31–0.33 and the obtained static friction coefficient increases with the decrease of normal force. Wear experiment indicates that oxidation happens between the rubbing surfaces during the course of the testing. Wear debris is collected as agglomerates because of the function of adhesion force and water vapor and the agglomerates that are collected on top and lateral surfaces are of different shapes.